Awesome DIY Pet Feeding Station Dresser

Being the owner of a very large dog, I know all too well the bloat hazards of allowing them to eat from a bowl on the floor. This awesome DIY Pet Feeding Station from the folks at Design Confidential is a great solution for this. The best part about this DIY Pet Feeding Station is that it is made from a dresser with 3 drawers, so depending on the size of your dog you can change the drawer that includes the feeding dishes. This would be great for a large breed puppy to start out at the bottom and work it’s way up to the higher drawers!

Material You Will Need:

  • One full sheet of ¾” plywood
  • One quarter sheet of ¾” plywood
  • 2 – 2×2 at 6’
  • 1 – 1×4 at 6’
  • 1-1/4” pocket hole screws
  • 1-1/4” brad nails
  • Edge banding for the edges of the plywood, optional
  • One set of 14” Drawer Slides
  • 3 – Drawer Pulls
  • One 24” Continuous Hinge
  • Wood filler
  • Sandpaper
  • Wood glue
  • Finishing Supplies

To get complete instructions with photo diagrams to build this DIY Pet Feeding Station Dresser go HERE

Like us on Facebook: Gotta Love DIY

Image Source: Design Confidential


Leave a Reply

Your email address will not be published. Required fields are marked *