Being the owner of a very large dog, I know all too well the bloat hazards of allowing them to eat from a bowl on the floor. This awesome DIY Pet Feeding Station from the folks at Design Confidential is a great solution for this. The best part about this DIY Pet Feeding Station is that it is made from a dresser with 3 drawers, so depending on the size of your dog you can change the drawer that includes the feeding dishes. This would be great for a large breed puppy to start out at the bottom and work it’s way up to the higher drawers!
Material You Will Need:
- One full sheet of ¾” plywood
- One quarter sheet of ¾” plywood
- 2 – 2×2 at 6’
- 1 – 1×4 at 6’
- 1-1/4” pocket hole screws
- 1-1/4” brad nails
- Edge banding for the edges of the plywood, optional
- One set of 14” Drawer Slides
- 3 – Drawer Pulls
- One 24” Continuous Hinge
- Wood filler
- Sandpaper
- Wood glue
- Finishing Supplies
To get complete instructions with photo diagrams to build this DIY Pet Feeding Station Dresser go HERE
Like us on Facebook: Gotta Love DIY
Image Source: Design Confidential
Leave a Reply